View HD74HC678_542242.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HD74HC678
16-bit Address Comparator
Description
The HD74HC678 address comparator simplifies addressing of memory boards and/or other peripheral devices. The four P inputs are normally hard wired with a preprogrammed address. An internal decoder determines what input information applied to the 16 A inputs must be low or high to cause a low state at the output (Y). For example, a positive-logic bit combination of 0111 (decimal 7) at the P input determines that inputs A1 through A7 must be low and that inputs A8 through A16 must be high to cause the output to go low. Equality of the address applied at the A inputs to the preprogrammed address is indicated by the output being low. The HD74HC678 features a transparent latch and a latch enabled input (C). When C is high, the device is in the transparent mode. When C is low, the previous logic state of Y is latched.
Features
* * * * * High Speed Operation High Output Current: Fanout of 10 LSTTL Loads Wide Operating Voltage: VCC = 2 to 6 V Low Input Current: 1 A max Low Quiescent Supply Current: ICC (static) = 4 A max (Ta = 25C)
HD74HC678
Function Table
Inputs C H H H H H H H H H H H H H H H H H L P3 P2 P1 P0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 Output Y L L L L L L L L H H H H H H H H L L L L H H H H L L L L H H H H L L H H L L H H L L H H L L H H L H L H L H L H L H L H L H L H H L L L L L L L L L L L L L L L H H L L L L L L L L L L L L L L H H H L L L L L L L L L L L L L H H H H L L L L L L L L L L L L H H H H H L L L L L L L L L L L H H H H H H L L L L L L L L L L H H H H H H H L L L L L L L L L H H H H H H H H L L L L L L L L H H H H H H H H H L L L L L L L H H H H H H H H H H L L L L L L H H H H H H H H H H H L L L L L H H H H H H H H H H H H L L L L H H H H H H H H H H H H H L L L H H H H H H H H H H H H H H L L H H H H H H H H H H H H H H H L H H H H H H H H H H H H H H H H L L L L L L L L L L L L L L L L H Latched
All other combinations Any combination
2
HD74HC678
Pin Arrangement
A1 A2 A3 A4 A5 A6 A7 A8 A9
1 2 3 4 5 6 7 8 9
24 VCC 23 C 22 Y 21 P3 20 P2 19 P1 18 P0 17 A16 16 A15 15 A14 14 A13 13 A12 (Top view)
A10 10 A11 11 GND 12
3
HD74HC678
Logic Diagram
C
A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 IN A13 A14 A15 A16 P0 P1 P2 P3 CK Q Y
4
HD74HC678
DC Characteristics
Ta = 25C Item Input voltage Symbol VIH Ta = -40 to +85C Max -- -- -- 0.5 1.35 1.8 -- -- -- -- -- 0.1 0.1 0.1 0.33 0.33 1.0 40 A A I OL = 4 mA I OL = 5.2 mA Vin = VCC or GND Vin = VCC or GND, Iout = 0 A V I OH = -4 mA I OH = -5.2 mA Vin = VIH or VIL I OL = 20 A V Vin = VIH or VIL I OH = -20 A V Unit V Test Conditions
VCC (V) Min Typ Max Min 2.0 4.5 6.0 1.5 -- 3.15 -- 4.2 -- -- -- -- -- -- -- -- -- -- 0.5 1.5 3.15 4.2 --
VIL
2.0 4.5 6.0
1.35 -- 1.8 -- 1.9 4.4 5.9 4.13 5.63 -- -- --
Output voltage
VOH
2.0 4.5 6.0 4.5 6.0
1.9 2.0 -- 4.4 4.5 -- 5.9 6.0 -- 4.18 -- 5.68 -- -- -- -- -- -- -- -- -- --
VOL
2.0 4.5 6.0 4.5 6.0
0.0 0.1 0.0 0.1 0.0 0.1 -- -- -- --
0.26 -- 0.26 -- 0.1 -- 4.0 --
Input current Quiescent supply current
Iin I CC
6.0 6.0
5
HD74HC678
AC Characteristics (CL = 50 pF, Input tr = tf = 6 ns)
Ta = 25C Item Symbol Ta = -40 to +85C Max 410 82 70 265 53 45 190 38 33 -- -- -- 95 19 16 10 pF ns ns A to C ns C to Y ns A to Y Unit ns Test Conditions P to Y
VCC (V) Min Typ Max Min 2.0 4.5 6.0 -- -- -- -- -- -- -- -- -- -- 30 -- -- 21 -- -- 13 -- 330 -- 66 56 -- --
Propagation delay t PLH time t PHL
t PLH t PHL
2.0 4.5 6.0
210 -- 42 36 -- --
t PLH t PHL
2.0 4.5 6.0
150 -- 30 26 -- -- -- 75 15 13 10 -- -- 125 25 21 -- -- -- --
Setup time
t su
2.0 4.5 6.0
100 -- 20 17 -- -- -- -- 12 -- -- -- -- 5
Output rise/fall time
t TLH t THL
2.0 4.5 6.0
Input capacitance
Cin
--
6
Unit: mm
24 31.6 32.5 Max 13
1
2.13 Max
1.2
12 5.70 Max
15.0 Max
13.4
15.24
0.51 Min
2.54 Min
2.54 0.25
0.48 0.10
0.25 - 0.05 0 - 15
+ 0.11
Hitachi Code JEDEC EIAJ Weight (reference value)
DP-24 Conforms Conforms 3.1 g
Cautions
1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products.
Hitachi, Ltd.
Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109
URL
NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to:
Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX
Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.

▲Up To Search▲

Price & Availability of HD74HC678

	To Download HD74HC678 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .